WTD006, COB 4-eye surface light PAR lamp

Product Parameters
Model: WTD006
Color: Black
Material: ABS
Power: 120W
Voltage: AC 110V/220V, 50/60Hz
Light Source: 4 x 50W COB dualcolor
Channel: 6/8 CH
Control Mode: DMX512, Sound Activated, MasterSlave, Auto
Beam Angle: 25°
Waterproof Rating: IP20
Service Life: 10,000 hours
Display: LED
Heat Dissipation: FanNet weight: 2.5KG
Gross weight: 14KG
Product size 32*22*27 CM
Package size: 54.5*35*45CM

Packing List
Light x1
Power Cord x1
Instruction Manual x1

Instructions
1. Power Connection:
Plug the device into a grounded power outlet.
2. Installation:
Place the equipment in a wellventilated area, at least 50cm away from any surface. Ensure ventilation slots are unobstructed.
3. Safety Precautions:
Disconnect the power before performing any operation.
Operate within an ambient temperature not exceeding 40°C (maximum 45°C). Do not use the device at higher temperatures.
4. Maintenance:
If a fault occurs, stop using the equipment immediately and do not attempt repairs yourself. Improper maintenance can lead to damage and malfunction. Contact technical support for repair approval. Use only original parts and ensure the power cord is neither blocked nor damaged.
Avoid exposing eyes to the light source as it can trigger seizures in sensitive individuals.
The lamps are intended for decorative purposes and are not suitable for general household lighting.
5. Fuse Replacement:
Unplug the device from the power supply.
Remove the fuse holder using a screwdriver, replace the burnt fuse with one of the same specifications, reattach the fuse holder, and reconnect the device to the power supply.
Warning: If the fuse blows again, stop using the device and contact customer support. Continued use may cause serious damage.
6. Fixing the Equipment:
Secure the equipment using the screw holes on the bracket. Ensure it is firmly fixed to prevent vibration and movement during operation. Regularly check the equipment’s structural integrity.
Install the equipment out of reach of children and the elderly, and ensure no one can pass under the device.
7. EndofLife Disposal:
This product should not be discarded with household waste in European Community countries. Recycle the product to support sustainable resource recycling and environmental protection. Take the product to an electrical appliance collection center or contact the dealer for recycling.
8. Cleaning:
Disconnect the device from the power source before cleaning. Use a clean cloth to remove dust or dirt. Do not use harsh cleaners. We are not responsible for damage caused by improper handling, misuse, or wear and tear.

Effect
Basic lighting: Provide main stage lighting to ensure that actors and scenes are clearly visible
Color rendering: RGB color mixing function can create a rich stage atmosphere
Beam effect: When combined with smoke, it can form a clear light column, enhancing visual impact
Flexible control: supports DMX512 signal programming to achieve dynamic change effects
Efficient and energy-saving: LED light source has low heat generation, suitable for long-term performance use