YTD010, 295W Stage Disco DJ Moving Head Lighting

Instructions
Avoid electrical shock or fire by keeping the unit away from rain or moisture.
Intermittent use will extend the unit’s service life.
Clean the fan, fan net, and optical lens regularly to maintain optimal performance.
Do not use alcohol or other organic solvents to clean the shell.
Keep the product in a dry place and avoid environments above 60°C.
Ensure stable and secure installation.
Installation and dismantling should be performed by a professional.
Maintain power voltage fluctuation within ±10%. High voltage shortens light life, while low voltage affects performance.
After turning off the light, wait 20 minutes before restarting to allow for full cooling. Frequent switching reduces the lifespan of lamps and bulbs; intermittent use extends it.
Read the manual carefully for proper usage.
Use a cable conforming to EIA RS-485: 2-pole twisted, shielded, 120Ω characteristic impedance, 22-24 AWG, low capacity.
Do not use microphone cables or cables with different characteristics.
End connections must use XLR type 3 or 5-pin male/female connectors.
Insert a terminating plug with a 120Ω resistance (minimum 1/4 W) between terminals 2 and 3 into the last projector.
Ensure wires do not contact each other or the metal casing of the connectors. Connect the casing to the shield braid and pin 1 of the connectors.